Mark VI Suit
Iron Man Armor

Specifications: Iron Man Armored, Flying Suit,
Mark VI
Designer: Anthony Stark
Major Contractor: Avenger,
West Coast
Armor exterior Dimensions:
Height (overall): 78 in.
Width (overall): 34 in.
Width (short axis): 21 in.
Weight: 240 lbs.
Armor composition:
Surface/primary Layer: Molecularly aligned crystallized
iron over a base of titanium nitride. Metallized paint
is precise thickness to destructively interfere with RADAR
band microwaves.
Secondary Layer: Comprised of various thermoelectric
generators, temperature insulators and regulators.
Tertiary Layer: Consists of two independent, 'crimped'
armature electric motors that are aligned at right angles
to each other, which can simulate human musculature movement.
Special Features: Each layer possesses integrated
communication, power-handling and control circuitry -
with regions, which contain certain large area specializations,
such as the simulation of a specific muscle.
Note: Suit's microscopic scale chain mail is made
rigid by numerous computer-controlled magnetic beam generators.
These generators can sense and amplify the suit wearer's
motions and strength. Discrete networks of them are arranged,
in conjunction with the full-body system of DC motors,
to mimic the function of human musculature.
Armor Articulation Motivation:
Musculature enhancement: Amplifies wearer's strength
about 90 times.
Limits: DC electric motors allow for severe overloading
with a theoretical limit of 1,000% for .0085 seconds.
Power Supply:
Type: High-density storage battery, AC/DC electricity.
Primary: Cryogenic flat batteries.
Secondary: Solar power converters, regrouped in
microscopic ridges for improved collection efficiency,
arrayed on shoulders and headpiece.
Tertiary (back-up): Increased efficiency of conversion
of electric field potentials into usable electricity.
Mark VI two orders of magnitude more efficient than Mark
V.
Armor System Controls:
Type: Automatic, computerized, body motion following.
Sub-Systems: Local networks of muscle groups and
high-density computers, which control large scale movements
such as walking.
Special Features: Armor is comprised of finely
tessellated mail, which can minimize sudden compressions,
such as a blow, by racially dissipating the energy throughout
the suit.
Note: There are numerous spoken and cybernetically
interpreted commands, supplemented by a limited, experimental
self-motivating programming
Articulation Seals/reinforcement: All magnetic. Due to microscopic construction, seal topology allows a 4.5-inch diameter wrist cuff (for example) to have a practical circumference of 12 inches. This allows for a greater area over which a magnetic seal can be affected.
Life Support:
Range: High altitude to deep water: 130,000 feet
above to 1,800 feet below sea level.
Air Supply Duration: 2.5 hours
Pressure: Normal atmosphere (14.7 pounds per square
inch) maintained internally over a wide range of external
pressures.
Temperature: 73° Fahrenheit internal, over
-185° F to 2,500° F external. .85°-140°
internal, over 2,500°-15,000° F. external.
Environment Design Program:
Type: Full spectrum chemical, biological, nuclear
environment
Range: Two months on filtered external air
Exposure: Low-level radiation over 2 month period;
suit can tolerate short periods of high radiation by stepping
up magnetic beam generator's activity
Propulsion Systems:
Type: Entire armor generates anti-gravity force
field, turbine in boots and backpack provide thrust.
Maximum Speed: Mach 1.2 (960 mph)
Life Capacity: Normal flight configuration 3,200
lbs. High thrust: 5,300 lbs.
Range: N.F.C., About 2,000 mile (100 % load), 3,900
miles (50% load). H.T.: About 800 miles (100% load), 1,000
miles (50% load), about 7,500 miles (unloaded, ballistic
flight)
Fuel: Ambient air supplemented, on demand, by Stark
formula J9 jet fuel.
Weapon Sub-Systems:
Offensive:
Primary: Repulsor Rays
Description: Pulsed, laser-path guided, medium-density
plasma projectors.
Range: 40 feet
Limits: The suit palm blasters are able to fire
for very short periods of time. The duty cycle allows
for a 25% cooling period.
Secondary: Disruptor Beam
Description: Wide spectrum electromagnetic and
gravitic beam which are swept and pulsed within certain
frequency ranges in order to disrupt as many functions
of as many types of electromechanical devices as possible
Range: About 25 to 100 feet
Limits: Little effect on shielded devices.
Note: Some effect on living things possible through
low frequency gravitic pulsing which can upset equilibrium,
thalamic rate, nervous system and cardiovascular system,
depending on range.
- First appearance



